Dr.  Ahmed Elkaseer, Ph.D.

Dr. Ahmed Elkaseer, Ph.D.

  • Karlsruher Institut für Technologie (KIT)
    Institut für Automation und angewandte Informatik (IAI)

    Hermann-von-Helmholtz-Platz 1
    76344 Eggenstein-Leopoldshafen

    Fax: +49 721 608 22602
    Gebäude-Nr.: 445 / 449 / 668

Publikationen


2022
Material jetting for advanced applications: A state-of-the-art review, gaps and future directions
Elkaseer, A.; Chen, K. J.; Janhsen, J. C.; Refle, O.; Hagenmeyer, V.; Scholz, S. G.
2022. Additive Manufacturing, 60 (Part A), Art.-Nr.: 103270. doi:10.1016/j.addma.2022.103270
Gas-tight means zero defects - design considerations for thin-walled fluidic devices with overhangs by laser powder bed fusion
Grinschek, F.; Charles, A.; Elkaseer, A.; Klahn, C.; Scholz, S. G.; Dittmeyer, R.
2022. Materials & Design, 223, 111174. doi:10.1016/j.matdes.2022.111174
Elucidation of dross formation in laser powder bed fusion at down-facing surfaces : Phenomenon-oriented multiphysics simulation and experimental validation
Charles, A.; Bayat, M.; Elkaseer, A.; Thijs, L.; Hattel, J. H.; Scholz, S.
2022. Additive manufacturing, 50, Article no: 102551. doi:10.1016/j.addma.2021.102551
Non-Invasive Data Acquisition and IoT Solution for Human Vital Signs Monitoring: Applications, Limitations and Future Prospects
Salem, M.; Elkaseer, A.; El-Maddah, I. A. M.; Youssef, K. Y.; Scholz, S. G.; Mohamed, H. K.
2022. Sensors, 22 (17), Art.Nr. 6625. doi:10.3390/s22176625
Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
Solheid, J. S.; Elkaseer, A.; Wunsch, T.; Scholz, S.; Seifert, H. J.; Pfleging, W.
2022. Materials, 15 (9), Art.Nr. 3323. doi:10.3390/ma15093323
A Closer Look at Precision Hard Turning of AISI4340: Multi-Objective Optimization for Simultaneous Low Surface Roughness and High Productivity
Abbas, A. T.; Al-Abduljabbar, A. A.; Alnaser, I. A.; Aly, M. F.; Abdelgaliel, I. H.; Elkaseer, A.
2022. Materials, 15 (6), Art.-Nr.: 2106. doi:10.3390/ma15062106
Features Detection-Based Computer Vision of Transparent 3D Inkjet Printed Parts
Elkaseer, A.; Scholz, A.; Scholz, S. G.
2022. Proceedings of the Future Technologies Conference (FTC) 2021, Volume 2. Ed.: K. Arai, 218–231, Springer International Publishing
2021
Geometrical-based Simulation of Drop-on-Demand 3D Inkjet Printing
Elkaseer, A.; Schneider, S.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021: bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India
Effect of build platform location and part orientation on dimensional accuracy of downfacing surfaces in LPBF
Charles, A.; Elkaseer, A.; Thijs, L.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021, Bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India, Taylor and Francis
Down-facing surfaces in laser powder bed fusion of Ti6Al4V: Effect of dross formation on dimensional accuracy and surface texture
Charles, A. P.; Elkaseer, A.; Paggi, U.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2021. Additive manufacturing, 46, Article: 102148. doi:10.1016/j.addma.2021.102148
Effect of different cooling strategies on surface quality and power consumption in finishing end milling of stainless steel 316
Abbas, A. T.; Anwar, S.; Abdelnasser, E.; Luqman, M.; Abu Qudeiri, J. E.; Elkaseer, A.
2021. Materials, 14 (4), Art. Nr.: 903. doi:10.3390/ma14040903
Efficient Optimization Model for Buffer Size Problem in Production Line with Rework Path
Alkhalefah, H.; Abidi, M. H.; Umer, U.; Elkaseer, A.
2021. Proceedings 4th European International Conference on Industrial Engineering and Operations Management, IEOM 2021: 2-5 August 2021, Virtual. Ed.: M. Fargnoli, 2539–2551, IEOM Society International
Development of an Optimization Model for Multiple Production Systems with Split and Merge
Alkhalefah, H.; Abidi, M. H.; Umer, U.; Elkaseer, A.
2021. Proceedings of the International Conference on Industrial Engineering and Operations Management: Bangalore, India, August 16-18, 2021, 784–794, IEOM Society International
Features Detection-Based Computer Vision of Transparent 3D Inkjet Printed Parts
Elkaseer, A.; Scholz, A.; Scholz, S. G.
2021. Proceedings of the Future Technologies Conference (FTC) 2021, Volume 2. Hrsg.: K. Arai, 218–231, Springer International Publishing. doi:10.1007/978-3-030-89880-9_17
Fundamental investigation into tool wear and surface quality in high-speed machining of Ti6Al4V alloy
Abbas, A. T.; Al Bahkali, E. A.; Alqahtani, S. M.; Abdelnasser, E.; Naeim, N.; Elkaseer, A.
2021. Materials, 14 (23), 7128. doi:10.3390/ma14237128
Industry 4.0-Oriented Deep Learning Models for Human Activity Recognition
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2021. IEEE Access, 9, 150508–150521. doi:10.1109/ACCESS.2021.3125733
Development of Correction Factors for FDM 3D Printers: Experimental Investigation and ANN Modelling
Müller, T.; Elkaseer, A.; Wadlinger, J.; Salem, M.; Scholz, S. G.
2021. Sustainable Design and Manufacturing : Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. Scholz, 314–326, Springer Singapur. doi:10.1007/978-981-16-6128-0_30
Human Activity Recognition Using K-Nearest Neighbor Machine Learning Algorithm
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2021. Sustainable Design and Manufacturing – Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021). Ed.: S. Scholz, 304–313, Springer Singapur. doi:10.1007/978-981-16-6128-0_29
Additive Manufacturing in the Automotive Industry and the Potential for Driving the Green and Electric Transition
Charles, A.; Hofer, A.; Elkaseer, A.; Scholz, S. G.
2021. Sustainable Design and Manufacturing . Ed.: S. Scholz, 339–346, Springer Singapur. doi:10.1007/978-981-16-6128-0_32
Development of an Efficient Prediction Model for Optimal Design of Serial Production Lines
Alkhalefah, H.; Abu Qudeiri, J. E.; Umer, U.; Abidi, M. H.; Elkaseer, A.
2021. IEEE Access, 9, 61807–61818. doi:10.1109/ACCESS.2021.3074356
Additive Manufacturing: Comparative Study of an IoT Integrated Approach and a Conventional Solution
Shandilya, H.; Kuchta, M.; Elkaseer, A.; Müller, T.; Scholz, S. G.
2021. Proceedings of the Future Technologies Conference (FTC) 2020, Volume 2. Ed.: K. Arai, 976–986, Springer International Publishing. doi:10.1007/978-3-030-63089-8_64
Heterogeneous Dual-Frequency IoT Network for Vital Data Acquisition
Salem, M.; El-Maddah, I.; Youssef, K.; Elkaseer, A.; Scholz, S.; Mohamed, H.
2021. Sustainable Design and Manufacturing 2020. Ed.: S. Scholz, 333–343, Springer Nature. doi:10.1007/978-981-15-8131-1_30
2020
Development of Precision Additive Manufacturing Processes
Elkaseer, A.; Charles, A. P.; Scholz, S. G.
2020. Precision additive metal manufacturing. Ed.: R. Leach, 35–68, CRC Press. doi:10.1201/9780429436543-3
FE Simulation of Inertia Friction Welding of Similar PVC-PVC and PA6-PA6 Hollow Cylinders for Process Optimization
Kouta, H.; Elsanabary, S.; El Hadek, M.; Elkaseer, A.
2020. Sylwan, 164 (1), 407–428
In-Process Digital Monitoring of Additive Manufacturing: Proposed Machine Learning Approach and Potential Implications on Sustainability
Charles, A. P.; Salem, M.; Moshiri, M.; Elkaseer, A.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 297–306, Springer. doi:10.1007/978-981-15-8131-1_27
Impact of Nonplanar 3D Printing on Surface Roughness and Build Time in Fused Filament Fabrication
Elkaseer, A.; Müller, T.; Rabsch, D.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 285–295, Springer. doi:10.1007/978-981-15-8131-1_26
An Industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system
Moshiri, M.; Charles, A. P.; Elkaseer, A.; Scholz, S.; Mohanty, S.; Tosello, G.
2020. Procedia CIRP, 93, 32–37. doi:10.1016/j.procir.2020.04.151
Towards an Adaptive Design of Quality, Productivity and Economic Aspects When Machining AISI 4340 Steel With Wiper Inserts
Abbas, A. T.; Abubakr, M.; Elkaseer, A.; El Rayes, M. M.; Mohammed, M. L.; Hegab, H.
2020. IEEE access, 8, 159206–159219. doi:10.1109/ACCESS.2020.3020623
Eight Weeks Later - The Unprecedented Rise of 3D Printing during the COVID-19 Pandemic : a Case Study, Lessons Learned, and Implications on the Future of Global Decentralized Manufacturing
Mueller, T.; Elkaseer, A.; Charles, A. P.; Fauth, J.; Rabsch, D.; Scholz, A.; Marquardt, C.; Nau, K.; Scholz, S. G.
2020. Applied Sciences, 10 (12), 4135. doi:10.3390/app10124135
Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing
Elkaseer, A.; Schneider, S.; Scholz, S. G.
2020. Applied Sciences, 10 (8), Article: 2899. doi:10.3390/app10082899
Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V
Charles, A. P.; Elkaseer, A.; Thijs, L.; Scholz, S. G.
2020. Applied Sciences, 10 (7), Article: 2416. doi:10.3390/app10072416
Principles and Characteristics of Different EDM Processes in Machining Tool and Die Steels
Abu Qudeiri, J. E.; Zaiout, A.; Mourad, A.-H. I.; Abidi, M. H.; Elkaseer, A.
2020. Applied Sciences, 10 (6), Article no.: 2082. doi:10.3390/app10062082
Software Toolkit for Visualization and Process Selection for Modular Scalable Manufacturing of 3D Micro-Devices
Scholz, S.; Elkaseer, A.; Salem, M.; Hagenmeyer, V.
2020. Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. Ed.: L. Borzemski, 160–172, Springer International Publishing. doi:10.1007/978-3-030-30440-9_16
2019
3D Printing Technologies in KNMF
Mueller, T.; Elkaseer, A.; Scholz, S.
2019, Oktober 24. International Symposium on Thermal Effects in Gas Flows in Microscale (ISTEGIM 2019), Ettlingen, Deutschland, 24.–25. Oktober 2019
Vision system-based inspection and alignment of laminated polymer films for 3D-Integration of microsystems
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. IFAC-PapersOnLine, 52 (15), 13–18. doi:10.1016/j.ifacol.2019.11.642
ANN-based modelling of dimensional accuracy in L-PBF
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S. G.
2019. Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Ed.: A. Bernard, Ecole Centrale de Nantes
ANN based prediction of dimensional error in down-facing surfaces for laser powder bed fusion parts
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S.
2019. ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing (2019), Nantes, Frankreich, 16.–18. September 2019
Total Cost of Ownership for different state of the art FDM Machines
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Sustainable Design and Manufacturing 2019 : Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19) - Budapest, Hungary, 4 - 5 July 2019. Ed.: P. Ball, 351–361, Springer
Vision system-based inspection and alignment of laminated polymer films for 3D-integration of microsystems
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. 8th / 11th IFAC Symposium on Mechatronic Systems and IFAC Symposium on Nonlinear Control Systems (MECHATRONICS / NOLCOS 2019), Wien, Österreich, 4.–6. September 2019
Prediction of Dimensional Error in Down-Facing Surfaces for Laser Powder Bed Fusion Parts [in press]
Charles, A. P.; Elkaseer, A.; Hagenmeyer, V.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September
FDM Process Optimisation for Low Surface Roughness and Energy Consumption
Elkaseer, A.; Schneider, S.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September
ANN-based modelling of dimensional accuracy in L-PBF
Charles, A. P.; Elkaseer, A.; Salem, M.
2019. Conference Proceedings - Special Interest Group : Advancing Precision in Additive Manufacturing 2019, 16th - 18th September 2019, Nantes, France, European Society for Precision Engineering and Nanotechnology (euspen)
FEM-based study of precision hard turning of stainless steel 316L
Elkaseer, A.; Abdelaziz, A.; Saber, M.; Nassef, A.
2019. Materials, 12 (16), Art.-Nr.: 2522. doi:10.3390/ma12162522
On the Assessment of Thermo-mechanical Degradability of Multi-recycled ABS Polymer for 3D Printing Applications
Charles, A. P.; Bassan, P. M.; Mueller, T.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 363–373, Springer. doi:10.1007/978-981-13-9271-9_30
Total Cost of Ownership for Different State of the Art FDM Machines (3D Printers)
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 351–361, Springer. doi:10.1007/978-981-13-9271-9_29
Self-Flushing in EDM Drilling of Ti6Al4V Using Rotating Shaped Electrodes
Goiogana, M.; Elkaseer, A.
2019. Materials, 12 (6), Article: 989. doi:10.3390/ma12060989
Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2019. Applied Sciences, 9 (6), Article: 1256. doi:10.3390/app9061256
Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect
Abu Qudeiri, J.; Saleh, A.; Ziout, A.; Mourad, A.-H.; Abidi, M.; Elkaseer, A.
2019. Materials, 12 (6), 907. doi:10.3390/ma12060907
Laser Ablation of Cobalt-Bound Tungsten Carbide and Aluminium Oxide Ceramic: Experimental Investigation with ANN Modelling and GA Optimisation
Elkaseer, A.; Lambarri, J.; Quintana, I.; Scholz, S.
2019. Sustainable Design and Manufacturing 2018 – Proceedings of the 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18). Ed.: D. Dao, 21–30, Springer International Publishing. doi:10.1007/978-3-030-04290-5_3
Modelling and experimental validation of surface roughness in precision turning of dual-phase materials considering process uncertainties
Elsanabary, S.; Elkaseer, A.; Abd-Rabbo, S.; AbdElsalam, M.; Abdou, S.
2019. International journal on interactive design and manufacturing, 13 (1), 59–74. doi:10.1007/s12008-018-0490-8
Industrial internet of things solution for real-time monitoring of the additive manufacturing process
Salama, M.; Elkaseer, A.; Saied, M.; Ali, H.; Scholz, S.
2019. Advances in Intelligent Systems and Computing, 852, 355–365. doi:10.1007/978-3-319-99981-4_33
2018
Wear behaviour of grey cast iron with the presence of copper addition
Abdou, S.; Elkaseer, A.; Kouta, H.; Abu Qudeiri, J.
2018. Advances in mechanical engineering, 10 (10), 1–8. doi:10.1177/1687814018804741
A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. 44th Euromicro Conference on Software Engineering and Advanced Applications (2018), Prag, Tschechien, 29.–31. August 2018
Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018
Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing. Ed.: J. Valentincic, 389–392, Research Publishing. doi:10.3850/978-981-11-2728-1_58
A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. Euromicro Conference on Software Engineering and Advanced Applications 2018 (SEAA 2018), Prague, CZ, August 29-31, 2018. Ed.: T. Bures, 314–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SEAA.2018.00058
Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, 22.–25. Juni 2018
Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, ASPE
A Study of the Factors Influencing Generated Surface Roughness of Downfacing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing, Portoroz, SLO, September 18-20, 2018, 327–330, Research Publishing. doi:10.3850/978-981-11-2728-1_57
A study of the factors influencing generated surface roughness of downfacing surfaces in selective laser melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018
Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. Proceedings of the 14th IEEE International Conference on Automation Science and Engineering (CASE), München, August 20-24, 2018, 1012–1017, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COASE.2018.8560405
Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), München, Deutschland, 20.–24. August 2018
Replication of Overmolded Orthopedic Implants with a Functionalized Thin Layer of Biodegradable Polymer
Elkaseer, A.; Mueller, T.; Azcarate, S.; Philipp-Pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Sampaio, D.; Hagenmeyer, V.; Scholz, S.
2018. Polymers, 10 (7), Article: 707. doi:10.3390/polym10070707
Approaches to a Practical Implementation of Industry 4.0
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. ACHI 2018 : 11th International Conference on Advances in Computer-Human Interactions, Roma, I, March 25-29, 2018
Approaches to a Practical Implementation of Industry 4.0
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. ACHI 2018 : 11th International Conference on Advances in Computer-Human Interactions, Roma, I, March 25-29, 2018. Ed.: B. Gersbeck-Schierholz, 141–146, IARIA
Electric discharge machining of titanium and its alloys : review
Abu Qudeiri, J. E.; Mourad, A.-H. I.; Ziout, A.; Abidi, M. H.; Elkaseer, A.
2018. The international journal of advanced manufacturing technology, 96 (1-4), 1319–1339. doi:10.1007/s00170-018-1574-0
Abrasive jet drilling of glass sheets: Effect and optimisation of process parameters on kerf taper
Nassef, A.; Elkaseer, A.; Abdelnasser, E. S.; Negm, M.; Qudeiri, J. A.
2018. Advances in mechanical engineering, 10 (1), 1–10. doi:10.1177/1687814017748435