Publications

Effect of Milling Strategy on the Surface Quality of AISI P20 Mold Steel
Abbas, A. T.; Abdelnasser, E.; Naeim, N.; Alqosaibi, K. F.; Al-Bahkali, E. A.; Elkaseer, A.
2024. Metals, 14 (1), Art.-Nr.: 48. doi:10.3390/met14010048

On the quantitative assessment of the effect of multiple process parameters on the printed layer height in 3D inkjet printing
Elkaseer, A.; Chen, K. J.; Kuchta, M.; Scholz, S. G.
2023. Virtual and Physical Prototyping, 18 (1), Art.-Nr.: e2269898. doi:10.1080/17452759.2023.2269898

On the Development of a Reconfigurable Platform for the Control of Multiple Collaborative Robots from a Software Engineering Perspective
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, November 2. Future Technologies Conference (FTC 2023), San Francisco, CA, USA, November 2–3, 2023

A study on the effect of process parameters on feature resolution in 3D inkjet printing
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2023, September 21. World Congress on Micro and Nano Manufacturing (WCMNM 2023), Evanston, IL, USA, September 18–21, 2023

Intelligent Collaborative Robots Augmented with Vision Perception for Flexible Manufacturing System
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, September 18. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italy, September 18–20, 2023

A study on the effect of process parameters on feature resolution in 3D inkjet printing
Chen, K. J.-Y.
2023. WCMNM 2023 Proceedings, World Congress on Micro and Nano Manufacturing, Evanston, 18th - 21st September 2023

Multi-Objective Optimization of AISI P20 Mold Steel Machining in Dry Conditions Using Machine Learning—TOPSIS Approach
Abbas, A. T.; Sharma, N.; Alsuhaibani, Z. A.; Sharma, A.; Farooq, I.; Elkaseer, A.
2023. Machines, 11 (7), Art.-Nr.: 748. doi:10.3390/machines11070748

Investigation and Statistical Analysis for Optimizing Surface Roughness, Cutting Forces, Temperature, and Productivity in Turning Grey Cast Iron
El Rayes, M. M.; Abbas, A. T.; Al-Abduljabbar, A. A.; Ragab, A. E.; Benyahia, F.; Elkaseer, A.
2023. Metals, 13 (6), Art.-Nr.: 1098. doi:10.3390/met13061098

Development and Numerical Optimization of a System of Integrated Agents for Serial Production Lines
Alkhalefah, H.; Umer, U.; Abidi, M. H.; Elkaseer, A.
2023. Processes, 11 (5), Art.-Nr.: 1578. doi:10.3390/pr11051578

Experimental Investigation of Surface Roughness and Material Removal Rate in Wire EDM of Stainless Steel 304
Naeim, N.; AbouEleaz, M. A.; Elkaseer, A.
2023. Materials, 16 (3), Art.-Nr. 1022. doi:10.3390/ma16031022

Precision Face Milling of Maraging Steel 350: An Experimental Investigation and Optimization Using Different Machine Learning Techniques
Abbas, A. T.; Helmy, M. O.; Al-Abduljabbar, A. A.; Soliman, M. S.; Hasan, A. S.; Elkaseer, A.
2023. Machines, 11 (11), Art.-Nr.: 1001. doi:10.3390/machines11111001

Wire Electrical Discharge Machining of AISI304 and AISI316 Alloys: A Comparative Assessment of Machining Responses, Empirical Modeling and Multi-Objective Optimization
Aboueleaz, M. A.; Naeim, N.; Abdelgaliel, I. H.; Aly, M. F.; Elkaseer, A.
2023. Journal of Manufacturing and Materials Processing, 7 (6), Article no: 194. doi:10.3390/jmmp7060194

On the Development of a Reconfigurable Platform for the Control of Multiple Collaborative Robots from a Software Engineering Perspective
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2023, Volume 1. Ed.: Kohei Arai, 74–91, Springer Nature Switzerland. doi:10.1007/978-3-031-47454-5_6

Influence of Technological Parameters on Chip Formation and Chip Control in Precision Hard Turning of Ti-6Al-4V
Abdelnasser, E.; El-Sanabary, S.; Nassef, A.; Barakat, A.; Elkaseer, A.
2023. Micromachines, 14 (10), 1–19. doi:10.3390/mi14101973

Effect of Wiper Edge Geometry on Machining Performance While Turning AISI 1045 Steel in Dry Conditions Using the VIKOR-ML Approach
Abbas, A. T.; Sharma, N.; Soliman, M. S.; El Rayes, M. M.; Sharma, R. C.; Elkaseer, A.
2023. Machines, 11 (7), Art.-Nr.: 719. doi:10.3390/machines11070719

Brain Tumor Classification Using Hybrid Single Image Super-Resolution Technique with ResNext101_32x8d and VGG19 Pre-Trained Models
Mohsen, S.; Ali, A. M.; El-Rabaie, E.-S. M.; ElKaseer, A.; Scholz, S. G.; Hassan, A. M. A.
2023. IEEE Access, 11, 55582–55595. doi:10.1109/ACCESS.2023.3281529

Effects of Tool Edge Geometry and Cutting Conditions on the Performance Indicators in Dry Turning AISI 1045 Steel
Abbas, A. T.; El Rayes, M. M.; Al-Abduljabbar, A. A.; Ragab, A. E.; Benyahia, F.; Elkaseer, A.
2023. Machines, 11 (3), 397. doi:10.3390/machines11030397

Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts
Mathew, A.; Kishore, S. R.; Tomy, A. T.; Sugavaneswaran, M.; Scholz, S. G.; Elkaseer, A.; Wilson, V. H.; John Rajan, A.
2023. Progress in Additive Manufacturing, 8, 1161–1178. doi:10.1007/s40964-022-00391-7

Simulation in Additive Manufacturing and Its Implications for Sustainable Manufacturing in the Era of Industry 4.0
Charles, A.; Bayat, M.; Elkaseer, A.; Scholz, S.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 370–377, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_36

Multi-parameter Analysis for High-Precision Inkjet Printing
Elkaseer, A.; Kuchta, M.; Rees, A.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 378–387, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_37

Multi-Objective Optimization of Performance Indicators in Turning of AISI 1045 under Dry Cutting Conditions
Abbas, A. T.; Al-Abduljabbar, A. A.; El Rayes, M. M.; Benyahia, F.; Abdelgaliel, I. H.; Elkaseer, A.
2023. Metals, 13 (1), 96. doi:10.3390/met13010096

A Hybrid Learning-Driven Computer Vision Framework for Reverse Engineering via Enhanced 3D Shape Reconstruction
Salem, M.; Elkaseer, A.; Rees, A.; Scholz, S. G.
2023. Proceedings of the Future Technologies Conference (FTC) 2022, Volume 2, 848–861, Springer International Publishing. doi:10.1007/978-3-031-18458-1_58

Critical Assessment of Current State of the Art in Wearable Sensor Nodes with Energy Harvesting Systems for Healthcare Applications
Alattar, A. E.; Elkaseer, A.; Scholz, S.; Mohsen, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2022. Vol.: 3. Ed.: K. Arai, 398–412, Springer International Publishing. doi:10.1007/978-3-031-18344-7_27

Material jetting for advanced applications: A state-of-the-art review, gaps and future directions
Elkaseer, A.; Chen, K. J.; Janhsen, J. C.; Refle, O.; Hagenmeyer, V.; Scholz, S. G.
2022. Additive Manufacturing, 60 (Part A), Art.-Nr.: 103270. doi:10.1016/j.addma.2022.103270

Gas-tight means zero defects - design considerations for thin-walled fluidic devices with overhangs by laser powder bed fusion
Grinschek, F.; Charles, A.; Elkaseer, A.; Klahn, C.; Scholz, S. G.; Dittmeyer, R.
2022. Materials & Design, 223, 111174. doi:10.1016/j.matdes.2022.111174

On the Assessment of the Effect of Multiple Process Parameters on the Precision of 3D Inkjet Printing
Elkaseer, A.; Kuchta, M.; Scholz, S. G.
2022. Proceedings of the World Congress on Micro and Nano Manufacturing, 19-22 September 2022, Leuven, Belgium. Ed.: S. Castagne, 126–131, Research Publishing. doi:10.3850/978-981-18-5180-3_RP26-0069

Elucidation of dross formation in laser powder bed fusion at down-facing surfaces : Phenomenon-oriented multiphysics simulation and experimental validation
Charles, A.; Bayat, M.; Elkaseer, A.; Thijs, L.; Hattel, J. H.; Scholz, S.
2022. Additive manufacturing, 50, Article no: 102551. doi:10.1016/j.addma.2021.102551

Non-Invasive Data Acquisition and IoT Solution for Human Vital Signs Monitoring: Applications, Limitations and Future Prospects
Salem, M.; Elkaseer, A.; El-Maddah, I. A. M.; Youssef, K. Y.; Scholz, S. G.; Mohamed, H. K.
2022. Sensors, 22 (17), Art.Nr. 6625. doi:10.3390/s22176625

Effect of Process Parameters on the Performance of Drop-On-Demand 3D Inkjet Printing: Geometrical-Based Modeling and Experimental Validation
Elkaseer, A.; Schneider, S.; Deng, Y.; Scholz, S. G.
2022. Polymers, 14 (13), Art.-Nr.: 2557. doi:10.3390/polym14132557

Part Tailoring in Metal-Additive Manufacturing: A Step towards Functionally Graded Customized Stainless-Steel Components Using Laser Powder Bed Fusion
Elkaseer, A.; Charles, A.; Schneider, S.; Scholz, S. G.
2022. Applied Sciences, 12 (12), Art.Nr. 6193. doi:10.3390/app12126193

Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
Solheid, J. S.; Elkaseer, A.; Wunsch, T.; Scholz, S.; Seifert, H. J.; Pfleging, W.
2022. Materials, 15 (9), Art.Nr. 3323. doi:10.3390/ma15093323

A Closer Look at Precision Hard Turning of AISI4340: Multi-Objective Optimization for Simultaneous Low Surface Roughness and High Productivity
Abbas, A. T.; Al-Abduljabbar, A. A.; Alnaser, I. A.; Aly, M. F.; Abdelgaliel, I. H.; Elkaseer, A.
2022. Materials, 15 (6), Art.-Nr.: 2106. doi:10.3390/ma15062106

Features Detection-Based Computer Vision of Transparent 3D Inkjet Printed Parts
Elkaseer, A.; Scholz, A.; Scholz, S. G.
2022. Proceedings of the Future Technologies Conference (FTC) 2021, Volume 2. Ed.: K. Arai, 218–231, Springer International Publishing. doi:10.1007/978-3-030-89880-9_17

Development of Correction Factors for FDM 3D Printers: Experimental Investigation and ANN Modelling
Müller, T.; Elkaseer, A.; Wadlinger, J.; Salem, M.; Scholz, S. G.
2022. Sustainable Design and Manufacturing : Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. Scholz, 314–326, Springer Singapur. doi:10.1007/978-981-16-6128-0_30

Human Activity Recognition Using K-Nearest Neighbor Machine Learning Algorithm
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2022. Sustainable Design and Manufacturing – Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021). Ed.: S. Scholz, 304–313, Springer Singapur. doi:10.1007/978-981-16-6128-0_29

Additive Manufacturing in the Automotive Industry and the Potential for Driving the Green and Electric Transition
Charles, A.; Hofer, A.; Elkaseer, A.; Scholz, S. G.
2022. Sustainable Design and Manufacturing: Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. G. Scholz, 339–346, Springer Singapur. doi:10.1007/978-981-16-6128-0_32

Geometrical-based Simulation of Drop-on-Demand 3D Inkjet Printing
Elkaseer, A.; Schneider, S.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021: bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India

Effect of build platform location and part orientation on dimensional accuracy of downfacing surfaces in LPBF
Charles, A.; Elkaseer, A.; Thijs, L.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021, Bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India, Taylor and Francis

Down-facing surfaces in laser powder bed fusion of Ti6Al4V: Effect of dross formation on dimensional accuracy and surface texture
Charles, A. P.; Elkaseer, A.; Paggi, U.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2021. Additive manufacturing, 46, Article: 102148. doi:10.1016/j.addma.2021.102148

Effect of different cooling strategies on surface quality and power consumption in finishing end milling of stainless steel 316
Abbas, A. T.; Anwar, S.; Abdelnasser, E.; Luqman, M.; Abu Qudeiri, J. E.; Elkaseer, A.
2021. Materials, 14 (4), Art. Nr.: 903. doi:10.3390/ma14040903

Efficient Optimization Model for Buffer Size Problem in Production Line with Rework Path
Alkhalefah, H.; Abidi, M. H.; Umer, U.; Elkaseer, A.
2021. Proceedings 4th European International Conference on Industrial Engineering and Operations Management, IEOM 2021: 2-5 August 2021, Virtual. Ed.: M. Fargnoli, 2539–2551, IEOM Society International

Development of an Optimization Model for Multiple Production Systems with Split and Merge
Alkhalefah, H.; Abidi, M. H.; Umer, U.; Elkaseer, A.
2021. Proceedings of the International Conference on Industrial Engineering and Operations Management: Bangalore, India, August 16-18, 2021, 784–794, IEOM Society International

Fundamental investigation into tool wear and surface quality in high-speed machining of Ti6Al4V alloy
Abbas, A. T.; Al Bahkali, E. A.; Alqahtani, S. M.; Abdelnasser, E.; Naeim, N.; Elkaseer, A.
2021. Materials, 14 (23), 7128. doi:10.3390/ma14237128

Industry 4.0-Oriented Deep Learning Models for Human Activity Recognition
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2021. IEEE Access, 9, 150508–150521. doi:10.1109/ACCESS.2021.3125733

Development of an Efficient Prediction Model for Optimal Design of Serial Production Lines
Alkhalefah, H.; Abu Qudeiri, J. E.; Umer, U.; Abidi, M. H.; Elkaseer, A.
2021. IEEE Access, 9, 61807–61818. doi:10.1109/ACCESS.2021.3074356

Additive Manufacturing: Comparative Study of an IoT Integrated Approach and a Conventional Solution
Shandilya, H.; Kuchta, M.; Elkaseer, A.; Müller, T.; Scholz, S. G.
2021. Proceedings of the Future Technologies Conference (FTC) 2020, Volume 2. Ed.: K. Arai, 976–986, Springer International Publishing. doi:10.1007/978-3-030-63089-8_64

Heterogeneous Dual-Frequency IoT Network for Vital Data Acquisition
Salem, M.; El-Maddah, I.; Youssef, K.; Elkaseer, A.; Scholz, S.; Mohamed, H.
2021. Sustainable Design and Manufacturing 2020. Ed.: S. Scholz, 333–343, Springer Nature. doi:10.1007/978-981-15-8131-1_30

Development of Precision Additive Manufacturing Processes
Elkaseer, A.; Charles, A. P.; Scholz, S. G.
2020. Precision additive metal manufacturing. Ed.: R. Leach, 35–68, CRC Press. doi:10.1201/9780429436543-3

FE Simulation of Inertia Friction Welding of Similar PVC-PVC and PA6-PA6 Hollow Cylinders for Process Optimization
Kouta, H.; Elsanabary, S.; El Hadek, M.; Elkaseer, A.
2020. Sylwan, 164 (1), 407–428

Precision hard turning of ti6al4v using polycrystalline diamond inserts: Surface quality, cutting temperature and productivity in conventional and high-speed machining
Abdelnasser, E.; Barakat, A.; Elsanabary, S.; Nassef, A.; Elkaseer, A.
2020. Materials, 13 (24), Art.Nr. 5677. doi:10.3390/ma13245677

Comparative evaluation of surface quality, tool wear, and specific cutting energy for wiper and conventional carbide inserts in hard turning of aisi 4340 alloy steel
Abbas, A. T.; Anwar, S.; Hegab, H.; Benyahia, F.; Ali, H.; Elkaseer, A.
2020. Materials, 13 (22), Art.-Nr.: 5233. doi:10.3390/ma13225233

In-Process Digital Monitoring of Additive Manufacturing: Proposed Machine Learning Approach and Potential Implications on Sustainability
Charles, A. P.; Salem, M.; Moshiri, M.; Elkaseer, A.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 297–306, Springer. doi:10.1007/978-981-15-8131-1_27

Impact of Nonplanar 3D Printing on Surface Roughness and Build Time in Fused Filament Fabrication
Elkaseer, A.; Müller, T.; Rabsch, D.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 285–295, Springer. doi:10.1007/978-981-15-8131-1_26

An Industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system
Moshiri, M.; Charles, A. P.; Elkaseer, A.; Scholz, S.; Mohanty, S.; Tosello, G.
2020. Procedia CIRP, 93, 32–37. doi:10.1016/j.procir.2020.04.151

Towards an Adaptive Design of Quality, Productivity and Economic Aspects When Machining AISI 4340 Steel With Wiper Inserts
Abbas, A. T.; Abubakr, M.; Elkaseer, A.; El Rayes, M. M.; Mohammed, M. L.; Hegab, H.
2020. IEEE access, 8, 159206–159219. doi:10.1109/ACCESS.2020.3020623

Eight Weeks Later - The Unprecedented Rise of 3D Printing during the COVID-19 Pandemic : a Case Study, Lessons Learned, and Implications on the Future of Global Decentralized Manufacturing
Mueller, T.; Elkaseer, A.; Charles, A. P.; Fauth, J.; Rabsch, D.; Scholz, A.; Marquardt, C.; Nau, K.; Scholz, S. G.
2020. Applied Sciences, 10 (12), 4135. doi:10.3390/app10124135

On the Assessment of Surface Quality and Productivity Aspects in Precision Hard Turning of AISI 4340 Steel Alloy: Relative Performance of Wiper vs. Conventional Inserts
Abbas, A. T.; El Rayes, M. M.; Luqman, M.; Naeim, N.; Hegab, H.; Elkaseer, A.
2020. Materials, 13 (9), Article: 2036. doi:10.3390/ma13092036

Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing
Elkaseer, A.; Schneider, S.; Scholz, S. G.
2020. Applied Sciences, 10 (8), Article: 2899. doi:10.3390/app10082899

Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V
Charles, A. P.; Elkaseer, A.; Thijs, L.; Scholz, S. G.
2020. Applied Sciences, 10 (7), Article: 2416. doi:10.3390/app10072416

Principles and Characteristics of Different EDM Processes in Machining Tool and Die Steels
Abu Qudeiri, J. E.; Zaiout, A.; Mourad, A.-H. I.; Abidi, M. H.; Elkaseer, A.
2020. Applied Sciences, 10 (6), Article no.: 2082. doi:10.3390/app10062082

Software Toolkit for Visualization and Process Selection for Modular Scalable Manufacturing of 3D Micro-Devices
Scholz, S.; Elkaseer, A.; Salem, M.; Hagenmeyer, V.
2020. Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. Ed.: L. Borzemski, 160–172, Springer International Publishing. doi:10.1007/978-3-030-30440-9_16

3D Printing Technologies in KNMF
Mueller, T.; Elkaseer, A.; Scholz, S.
2019, October 24. International Symposium on Thermal Effects in Gas Flows in Microscale (ISTEGIM 2019), Ettlingen, Germany, October 24–25, 2019

Vision system-based inspection and alignment of laminated polymer films for 3D-Integration of microsystems
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. IFAC-PapersOnLine, 52 (15), 13–18. doi:10.1016/j.ifacol.2019.11.642

ANN-based modelling of dimensional accuracy in L-PBF
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S. G.
2019. Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Ed.: A. Bernard, Ecole Centrale de Nantes

ANN based prediction of dimensional error in down-facing surfaces for laser powder bed fusion parts
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S.
2019. ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing (2019), Nantes, France, September 16–18, 2019

Total Cost of Ownership for different state of the art FDM Machines
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Sustainable Design and Manufacturing 2019 : Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19) - Budapest, Hungary, 4 - 5 July 2019. Ed.: P. Ball, 351–361, Springer

Tailored Chip Breaker Development for Polycrystalline Diamond Inserts: FEM-based Design and Validation
Cascón, I.; Sarasua, J. A.; Elkaseer, A.
2019. Applied Sciences, 9 (19), 4117. doi:10.3390/app9194117

Vision system-based inspection and alignment of laminated polymer films for 3D-integration of microsystems
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. 8th / 11th IFAC Symposium on Mechatronic Systems and IFAC Symposium on Nonlinear Control Systems (MECHATRONICS / NOLCOS 2019), Vienna, Austria, September 4–6, 2019

Prediction of Dimensional Error in Down-Facing Surfaces for Laser Powder Bed Fusion Parts [in press]
Charles, A. P.; Elkaseer, A.; Hagenmeyer, V.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September

FDM Process Optimisation for Low Surface Roughness and Energy Consumption
Elkaseer, A.; Schneider, S.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September

ANN-based modelling of dimensional accuracy in L-PBF
Charles, A. P.; Elkaseer, A.; Salem, M.
2019. Conference Proceedings - Special Interest Group : Advancing Precision in Additive Manufacturing 2019, 16th - 18th September 2019, Nantes, France, European Society for Precision Engineering and Nanotechnology (euspen)

FEM-based study of precision hard turning of stainless steel 316L
Elkaseer, A.; Abdelaziz, A.; Saber, M.; Nassef, A.
2019. Materials, 12 (16), Art.-Nr.: 2522. doi:10.3390/ma12162522

On the Assessment of Thermo-mechanical Degradability of Multi-recycled ABS Polymer for 3D Printing Applications
Charles, A. P.; Bassan, P. M.; Mueller, T.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 363–373, Springer. doi:10.1007/978-981-13-9271-9_30

Total Cost of Ownership for Different State of the Art FDM Machines (3D Printers)
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 351–361, Springer. doi:10.1007/978-981-13-9271-9_29

Self-Flushing in EDM Drilling of Ti6Al4V Using Rotating Shaped Electrodes
Goiogana, M.; Elkaseer, A.
2019. Materials, 12 (6), Article: 989. doi:10.3390/ma12060989

Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2019. Applied Sciences, 9 (6), Article: 1256. doi:10.3390/app9061256

Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect
Abu Qudeiri, J.; Saleh, A.; Ziout, A.; Mourad, A.-H.; Abidi, M.; Elkaseer, A.
2019. Materials, 12 (6), 907. doi:10.3390/ma12060907

Laser Ablation of Cobalt-Bound Tungsten Carbide and Aluminium Oxide Ceramic: Experimental Investigation with ANN Modelling and GA Optimisation
Elkaseer, A.; Lambarri, J.; Quintana, I.; Scholz, S.
2019. Sustainable Design and Manufacturing 2018 – Proceedings of the 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18). Ed.: D. Dao, 21–30, Springer International Publishing. doi:10.1007/978-3-030-04290-5_3

Modelling and experimental validation of surface roughness in precision turning of dual-phase materials considering process uncertainties
Elsanabary, S.; Elkaseer, A.; Abd-Rabbo, S.; AbdElsalam, M.; Abdou, S.
2019. International journal on interactive design and manufacturing, 13 (1), 59–74. doi:10.1007/s12008-018-0490-8

Industrial internet of things solution for real-time monitoring of the additive manufacturing process
Salama, M.; Elkaseer, A.; Saied, M.; Ali, H.; Scholz, S.
2019. Advances in Intelligent Systems and Computing, 852, 355–365. doi:10.1007/978-3-319-99981-4_33

Wear behaviour of grey cast iron with the presence of copper addition
Abdou, S.; Elkaseer, A.; Kouta, H.; Abu Qudeiri, J.
2018. Advances in mechanical engineering, 10 (10), 1–8. doi:10.1177/1687814018804741

A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. 44th Euromicro Conference on Software Engineering and Advanced Applications (2018), Prague, Czechia, August 29–31, 2018

Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slovenia, September 17–20, 2018

Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing. Ed.: J. Valentincic, 389–392, Research Publishing. doi:10.3850/978-981-11-2728-1_58

A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. Euromicro Conference on Software Engineering and Advanced Applications 2018 (SEAA 2018), Prague, CZ, August 29-31, 2018. Ed.: T. Bures, 314–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SEAA.2018.00058

Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, June 22–25, 2018

Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, ASPE

A Study of the Factors Influencing Generated Surface Roughness of Downfacing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing, Portoroz, SLO, September 18-20, 2018, 327–330, Research Publishing. doi:10.3850/978-981-11-2728-1_57

A study of the factors influencing generated surface roughness of downfacing surfaces in selective laser melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slovenia, September 17–20, 2018

Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. Proceedings of the 14th IEEE International Conference on Automation Science and Engineering (CASE), München, August 20-24, 2018, 1012–1017, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COASE.2018.8560405

Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), Munich, Germany, August 20–24, 2018

Replication of Overmolded Orthopedic Implants with a Functionalized Thin Layer of Biodegradable Polymer
Elkaseer, A.; Mueller, T.; Azcarate, S.; Philipp-Pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Sampaio, D.; Hagenmeyer, V.; Scholz, S.
2018. Polymers, 10 (7), Article: 707. doi:10.3390/polym10070707

Approaches to a Practical Implementation of Industry 4.0
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. 11th International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rome, Italy, March 25–29, 2018

Approaches to a Practical Implementation of Industry 4.0
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. ACHI 2018 : 11th International Conference on Advances in Computer-Human Interactions, Roma, I, March 25-29, 2018. Ed.: B. Gersbeck-Schierholz, 141–146, International Academy, Research, and Industry Association (IARIA)

Electric discharge machining of titanium and its alloys : review
Abu Qudeiri, J. E.; Mourad, A.-H. I.; Ziout, A.; Abidi, M. H.; Elkaseer, A.
2018. The international journal of advanced manufacturing technology, 96 (1-4), 1319–1339. doi:10.1007/s00170-018-1574-0

Abrasive jet drilling of glass sheets: Effect and optimisation of process parameters on kerf taper
Nassef, A.; Elkaseer, A.; Abdelnasser, E. S.; Negm, M.; Qudeiri, J. A.
2018. Advances in mechanical engineering, 10 (1), 1–10. doi:10.1177/1687814017748435