N. N.

  • Karlsruhe Institute of Technology (KIT)
    Institute for Automation and Applied Informatics (IAI)

    Hermann-von-Helmholtz-Platz 1
    76344 Eggenstein-Leopoldshafen

    Fax: +49 721 608 22602
    Building-No.: 445 / 449 / 668

Publications


2024
A reproducible extrusion printing process with highly viscous nanoparticle inks
Ungerer, M.; Debatin, C.; Martel, J.; Maurer, V.; Reichert, K.-M.; Hofmann, A.; Gengenbach, U.
2024. Engineering Research Express, 6, Article no: 015042. doi:10.1088/2631-8695/ad1cb0
2023
Neue Methodik zur Optimierung von Druckverfahren für die Herstellung funktionaler Mikrostrukturen und hybrider elektronischer Schaltungen. PhD dissertation
Ungerer, M.
2023, December 19. Karlsruher Institut für Technologie (KIT)
Optimised inkjet-printing parameters and processing techniques for an exemplary structure of an oxygen sensor on a Polyimide substrate
Petani, L.; Schweizer, A.; Pylatiuk, C.; Stiller, P.; Gengenbach, U.; Ungerer, M.
2023. 2023 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), Boston, MA, USA, 09-12 July 2023, 1–4, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/FLEPS57599.2023.10220420
Design-for-manufacture of a dual-chamber nozzle for hydrodynamic focusing of the Aerosol-on-Demand jet-printhead
Ungerer, M.; Gengenbach, U.; Grewal, K. S.; Wenka, A.; Sieber, I.
2023. 2023 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 5 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/DTIP58682.2023.10267945
Systematic Investigation of Novel, Controlled Low‐Temperature Sintering Processes for Inkjet Printed Silver Nanoparticle Ink
Chen, Z.; Gengenbach, U.; Koker, L.; Huang, L.; Mach, T. P.; Reichert, K.-M.; Thelen, R.; Ungerer, M.
2023. Small. doi:10.1002/smll.202306865
Modelling and Design-for-Manufacturing of an Aerosol-on-Demand Jet-Printhead
Ungerer, M.; Benítez, J. L.; Zeltner, D.; Wenka, A.; Gengenbach, U.; Sieber, I.
2023. Simulation and Modeling Methodologies, Technologies and Applications. Ed.: G. Wagner, 1–21, Springer Nature Switzerland. doi:10.1007/978-3-031-43824-0_1
Position Analysis of the Atomiser Unit of an Aerosol-on-Demand Jet-Printhead by means of Computational Fluid Dynamics
Ungerer, M.; Walter, T.; Sieber, I.
2023. Proceedings of the 13th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - SIMULTECH Volume 1, 126–133, SciTePress. doi:10.5220/0012131000003546
2022
Design and experimental setup of a new concept of an aerosol-on-demand print head
Sieber, I.; Zeltner, D.; Ungerer, M.; Wenka, A.; Walter, T.; Gengenbach, U.
2022. Aerosol Science and Technology, 56 (4), 355–366. doi:10.1080/02786826.2021.2022094
Modelling and Simulation of an Aerosol-on-Demand Print Head with Computational Fluid Dynamics
Ungerer, M.; Zeltner, D.; Wenka, A.; Gengenbach, U.; Sieber, I.
2022. Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2022), July 14-16, 2022, in Lisbon, Portugal. Ed.: Gerd Wagner, 44–51, SciTePress. doi:10.5220/0011258100003274
2020
Automated fabrication of hybrid printed electronic circuits
Gengenbach, U.; Ungerer, M.; Koker, L.; Reichert, K.-M.; Stiller, P.; Allgeier, S.; Köhler, B.; Zhu, X.; Huang, C.; Hagenmeyer, V.
2020. Mechatronics, 70, 102403. doi:10.1016/j.mechatronics.2020.102403
2019
Automated fabrication of multi-layer printed electronic circuits using a novel vector ink-jet printing process control and surface mounting of discrete components [in press]
Gengenbach, U.; Ungerer, M.; Koker, L.; Reichert, K.-M.; Stiller, P.; Huang, C.; Hagenmeyer, V.
2019. Joint Conference - 8th IFAC Symposium on Mechatronic Systems - 11th Symposium on Nonlinear Control Systems, September 4-6, 2019, Vienna, Austria
Potential and Challenges of Inkjet-Printing for Wearable Medical Devices [in press]
Koker, L.; Mansour, M.; Ungerer, M.; Reichert, K.-M.; Stiller, P.; Gegenbach, U.
2019. BMT 2019 : 53th Annual Conference of the German Society for Biomedical Engineering : 25. - 26. September 2019, Frankfurt am Main. Ed.: J. Haueisen
2018
An integrated workflow to automatically fabricate flexible electronics by functional printing and SMT component mounting
Gengenbach, U.; Ungerer, M.; Aytac, E.; Koker, L.; Reichert, K. M.; Stiller, P.; Hagenmeyer, V.
2018. Proceedings of the 14th International Conference on Automation Science and Engineering (CASE), Paper ThCT4.4. doi:10.1109/COASE.2018.8560456
An integrated workflow to automatically fabricate flexible electronics by functional printing and SMT component mounting
Gengenbach, U.; Ungerer, M.; Aytac, E.; Koker, L.; Reichert, K. M.; Stiller, P.; Hagenmeyer, V.
2018. 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), Munich, Germany, August 20–24, 2018
Data-driven Design of an Inkjet-Printed Electronic Circuit
Koker, L.; Ungerer, M.; Mikolajek, M.; Neuper, F.; Kühner, T.; Gengenbach, U.
2018. Internationale Fachmesse und Kongress für gedruckte Elektronik (LOPEC 2018), München, 13.-15.März 2018
2017
A Method for the Analysis of the Nano- and Micromorphology of Printed Structures on Flexible Polymer Films
Ungerer, M.; Spomer, W.; Wacker, I.; Schröder, R.; Gengenbach, U.
2017. International journal on advances in intelligent systems, 10 (3-4), 383–392
Bonding of flexible multilayer printed systems based on PET-substrates. An investigation of challenges and promising approaches
Koker, L.; Paul, A.; Kinay, D.; Rakebrandt, J.-H.; Besser, H.; Moser, D.; Ungerer, M.; Gengenbach, U.
2017. ACHI 2017 : 10th International Conference on Advances in Computer-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 215–221, International Academy, Research, and Industry Association (IARIA)
Analysis of the cross section of inkjet-printed conductive tracks on PET films
Ungerer, M.; Spomer, W.; Veith, L.; Fries, A.; Debatin, C.; Wacker, I.; Schröder, R.; Gengenbach, U.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 162–168, International Academy, Research, and Industry Association (IARIA)
Bonding of flexible multilayer printed systems based on PET-substrates. An investigation of challenges and promising approaches
Koker, L.; Paul, A.; Kinay, D.; Rakebrandt, J.-H.; Besser, H.; Moser, D.; Ungerer, M.; Gengenbach, U.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nice, France, March 19–23, 2017
Analysis of the cross section of inkjet-printed conductive tracks on PET films
Ungerer, M.; Spomer, W.; Veith, L.; Fries, A.; Debatin, C.; Wacker, I.; Schröder, R.; Gengenbach, U.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nice, France, March 19–23, 2017
2016
Extrusion printing process for the manufacturing of electrodes on planar and curved substrates
Ungerer, M.; Maurer, V.; Hofmann, A.; Gengenbach, U.
2016. Internationale Fachmesse und Kongress für gedruckte Elektronik (LOPEC 2016), München, 5.-7.April 2016
2015
Dosierplattform zur Deposition von photoaktiven Fluiden für Anwendungen in der Photonik
Hofmann, A.; Kröger, M.; Ungerer, M.; Wondimu, S.; Dietrich, P. I.; Wienhold, T.; Lauermann, M.; Koos, C.; Bretthauer, G.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015. Proceedings auf CD-ROM, 127–130, VDE Verlag
Dosierplattform zur Deposition von photoaktiven Fluiden für Anwendungen in der Photonik
Hofmann, A.; Kröger, M.; Ungerer, M.; Wondimu, S.; Dietrich, P. I.; Wienhold, T.; Lauermann, M.; Koos, C.; Bretthauer, G.
2015. 6. Mikrosystemtechnik Kongress (2015), Karlsruhe, Germany, October 26–28, 2015
Ein Baukastensystem für multifunktionale, mehrlagige, gedruckte Systeme
Gengenbach, U.; Dickerhof, M.; Koker, L.; Nagel, J.; Sieber, I.; Schwartz, G.; Kuehner, T.; Torge, M.; Ungerer, M. B., G.
2015. 6. Mikrosystemtechnik Kongress (2015), Karlsruhe, Germany, October 26–28, 2015
Vergleichende Untersuchung und systemische Betrachtung verschiedener digitaler Ein-Düsen-Druckverfahren zur Herstellung funktionaler Mikrostrukturen
Ungerer, M.; Gengenbach, U.; Hofmann, A.; Bretthauer, G.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015
Vergleichende Untersuchung und systemische Betrachtung verschiedener digitaler Ein-Düsen-Druckverfahren zur Herstellung funktionaler Mikrostrukturen
Ungerer, M.; Gengenbach, U.; Hofmann, A.; Bretthauer, G.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015. Proceedings, CD-ROM, VDE Verlag