Hybridizing 3D printing and electroplating for the controlled forming of metal structures within fused deposition modelled contours
Müller, T.; Scholz, S.; Ehrhardt, M.; Ruíz Trujillo, S.; Cogollo de Cádiz, M.; Díaz Lantada, A.; Guttmann, M.
2025. The International Journal of Advanced Manufacturing Technology, 136 (10), 4369–4381. doi:10.1007/s00170-025-15089-7

SME Ready for the Future: Fostering Transformation and Sustainable Business Models for Manufacturing SMEs in Industry 4.0
Helman, J.; Rosienkiewicz, M.; Cholewa, M.; Molasy, M.; Scholz, S.; Müller, T.; Berselli, G.; Manara, F.; Pilepić, A. Ć.; Tikel, S.; Enyingi-Kurucz, A.
2025. Sustainable Design and Manufacturing 2024 – Proceedings of the 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024). Ed.: M. Jolly, 149–159, Springer Nature Singapore. doi:10.1007/978-981-96-4459-9_14

Intelligent Collaborative Robots Augmented with Vision Perception for Flexible Manufacturing System
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2025. Sustainable Design and Manufacturing 2024: Proceedings of the 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024). Ed.: M. Jolly, 67–78, Springer Nature Singapore. doi:10.1007/978-981-96-4459-9_7

Additive Manufacturing of Pressure-Resistant Vessels for Underwater Environmental Monitoring—Investigation of Printing Parameters in Fused Filament Fabrication
Mueller, T.; L’Hermitte, L.; Scholz, S.
2025. Sustainable Design and Manufacturing 2024: Proceedings of the 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024). Ed.: M. Jolly, 35–44, Springer Nature Singapore. doi:10.1007/978-981-96-4459-9_4

Exploring the Printability and Marine Degradation of Biodegradable, Starch-Based Polymers in Additive Manufacturing
Mueller, T.; Elkaseer, A.; von Stärk, S.; Scholz, S.
2025. Sustainable Design and Manufacturing 2024 – Proceedings of the 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024). Ed.: M. Jolly, 383–394, Springer Nature Singapore. doi:10.1007/978-981-96-4459-9_34

Exploring the printability and marine degradation of biodegradable, starch-based polymers in additive manufacturing
Müller, T.; Elkaseer, A.; Stärk, S. von; Scholz, S.
2024, September 19. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024

SME Ready for the Future: fostering transformation and sustainable business models for manufacturing SMEs in Industry 4.0
Helman, J.; Rosienkiewicz, M.; Cholewa, M.; Molasy, M.; Scholz, S.; Müller, T.; Berselli, G.; Manara, F.; Cosic Pilepic, A.; Tikel, S.; Enyingi-Kurucz, A.
2024, September 19. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024

On the Development of a Reconfigurable Platform for the Control of Multiple Collaborative Robots from a Software Engineering Perspective
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, November 2. Future Technologies Conference (FTC 2023), San Francisco, CA, USA, 2.–3. November 2023

Intelligent Collaborative Robots Augmented with Vision Perception for Flexible Manufacturing System
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, September 18. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italien, 18.–20. September 2023

On the Development of a Reconfigurable Platform for the Control of Multiple Collaborative Robots from a Software Engineering Perspective
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2023, Volume 1. Ed.: Kohei Arai, 74–91, Springer Nature Switzerland. doi:10.1007/978-3-031-47454-5_6

Additive manufacturing of pressure resistant vessels for underwater environmental monitoring – Investigation of printing parameters in fused filament fabrication
Mueller, T.; L’Hermitte, L.; Scholz, S.
2023. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italien, 18.–20. September 2023

Enhancing Agility and Reconfigurability in Production: A Database-Driven Infrastructure to Support Additive Manufacturing with Collaborative Robotics
Mueller, T.; Scholz, S.; Salem, M.; Hagenmeyer, V.; Schmidt, A.
2023. Production Processes and Product Evolution in the Age of Disruption – Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023, 255 – 263, Springer International Publishing. doi:10.1007/978-3-031-34821-1_28

Digital, Scalable Manufacturing - A Sustainable Production Scenario Using Collaborative Robotics and Additive Manufacturing
Müller, T.; Schmidt, A.; Scholz, S.; Hagenmeyer, V.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 262–271, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_25

Digital, Scalable Manufacturing - A Sustainable Production Scenario Using Collaborative Robotics and Additive Manufacturing
Müller, T.; Schmidt, A.; Scholz, S.; Hagenmeyer, V.
2022, September 14. 9th International Conference on Sustainable Design and Manufacturing (KES SDM-22 2022), Split / Dalmatien, Kroatien, 14.–16. September 2022

Development of Correction Factors for FDM 3D Printers: Experimental Investigation and ANN Modelling
Müller, T.; Elkaseer, A.; Wadlinger, J.; Salem, M.; Scholz, S. G.
2022. Sustainable Design and Manufacturing : Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. Scholz, 314–326, Springer Singapur. doi:10.1007/978-981-16-6128-0_30

Species richness is more important for ecosystem functioning than species turnover along an elevational gradient
Albrecht, J.; Peters, M. K.; Becker, J. N.; Behler, C.; Classen, A.; Ensslin, A.; Ferger, S. W.; Gebert, F.; Gerschlauer, F.; Helbig-Bonitz, M.; Kindeketa, W. J.; Kühnel, A.; Mayr, A. V.; Njovu, H. K.; Pabst, H.; Pommer, U.; Röder, J.; Rutten, G.; Schellenberger Costa, D.; Sierra-Cornejo, N.; Vogeler, A.; Vollstädt, M. G. R.; Dulle, H. I.; Eardley, C. D.; Howell, K. M.; Keller, A.; Peters, R. S.; Kakengi, V.; Hemp, C.; Zhang, J.; Manning, P.; Mueller, T.; Bogner, C.; Böhning-Gaese, K.; Brandl, R.; Hertel, D.; Huwe, B.; Kiese, R.; Kleyer, M.; Leuschner, C.; Kuzyakov, Y.; Nauss, T.; Tschapka, M.; Fischer, M.; Hemp, A.; Steffan-Dewenter, I.; Schleuning, M.
2021. Nature Ecology and Evolution, 5, 1582–1593. doi:10.1038/s41559-021-01550-9

One aspect of 3D printing during the COVID-19 Pandemic
Müller, T.; Charles, A. P.; Scholz, S.
2021, März 23. Re-Imagining the Futures of 3D Printing in Society - Scientific symposium and expert scenario workshop (2021), Online, 23.–24. März 2021

Wertstromkinematik – Produktionssysteme neu gedacht: Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 2)
Kimmig, A.; Schöck, M.; Mühlbeier, E.; Oexle, F.; Fleischer, J.; Bönsch, J.; Ovtcharova, J.; Hahn, J.; Grunwald, A.; Albers, A.; Rapp, S.; Hagenmeyer, V.; Scholz, S. G.; Schmidt, A.; Müller, T.; Becker, J.; Schade, F.; Beyerer, J.; Rehak, J.; Zwick, T.; Pauli, M.; Nuß, B.; Lanza, G.; Schild, L.; Overbeck, L.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (12), 935–939. doi:10.1515/zwf-2021-0207

Additive Manufacturing: Comparative Study of an IoT Integrated Approach and a Conventional Solution
Shandilya, H.; Kuchta, M.; Elkaseer, A.; Müller, T.; Scholz, S. G.
2021. Proceedings of the Future Technologies Conference (FTC) 2020, Volume 2. Ed.: K. Arai, 976–986, Springer International Publishing. doi:10.1007/978-3-030-63089-8_64

Impact of Nonplanar 3D Printing on Surface Roughness and Build Time in Fused Filament Fabrication
Elkaseer, A.; Müller, T.; Rabsch, D.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 285–295, Springer. doi:10.1007/978-981-15-8131-1_26

Eight Weeks Later - The Unprecedented Rise of 3D Printing during the COVID-19 Pandemic : a Case Study, Lessons Learned, and Implications on the Future of Global Decentralized Manufacturing
Mueller, T.; Elkaseer, A.; Charles, A. P.; Fauth, J.; Rabsch, D.; Scholz, A.; Marquardt, C.; Nau, K.; Scholz, S. G.
2020. Applied Sciences, 10 (12), 4135. doi:10.3390/app10124135

3D Printing Technologies in KNMF
Mueller, T.; Elkaseer, A.; Scholz, S.
2019, Oktober 24. International Symposium on Thermal Effects in Gas Flows in Microscale (ISTEGIM 2019), Ettlingen, Deutschland, 24.–25. Oktober 2019

On the Assessment of Thermo-mechanical Degradability of Multi-recycled ABS Polymer for 3D Printing Applications
Charles, A. P.; Bassan, P. M.; Mueller, T.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 363–373, Springer. doi:10.1007/978-981-13-9271-9_30

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations
Tosello, G.; Marhöfer, D. M.; Islam, A.; Müller, T.; Plewa, K.; Piotter, V.
2019. The international journal of advanced manufacturing technology, 102 (1-4), 225–240. doi:10.1007/s00170-018-03251-3

A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. 44th Euromicro Conference on Software Engineering and Advanced Applications (2018), Prag, Tschechien, 29.–31. August 2018

Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018

Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing. Ed.: J. Valentincic, 389–392, Research Publishing (SCIRP). doi:10.3850/978-981-11-2728-1_58

A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. Euromicro Conference on Software Engineering and Advanced Applications 2018 (SEAA 2018), Prague, CZ, August 29-31, 2018. Ed.: T. Bures, 314–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SEAA.2018.00058

Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, 22.–25. Juni 2018

Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, ASPE

A Study of the Factors Influencing Generated Surface Roughness of Downfacing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing, Portoroz, SLO, September 18-20, 2018, 327–330, Research Publishing (SCIRP). doi:10.3850/978-981-11-2728-1_57

A study of the factors influencing generated surface roughness of downfacing surfaces in selective laser melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018

Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. Proceedings of the 14th IEEE International Conference on Automation Science and Engineering (CASE), München, August 20-24, 2018, 1012–1017, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COASE.2018.8560405

Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), München, Deutschland, 20.–24. August 2018

Replication of Overmolded Orthopedic Implants with a Functionalized Thin Layer of Biodegradable Polymer
Elkaseer, A.; Mueller, T.; Azcarate, S.; Philipp-Pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Sampaio, D.; Hagenmeyer, V.; Scholz, S.
2018. Polymers, 10 (7), Article: 707. doi:10.3390/polym10070707

Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices
Khatri, B.; Lappe, K.; Habedank, M.; Mueller, T.; Megnin, C.; Hanemann, T.
2018. Polymers, 10 (6), 666–683. doi:10.3390/polym10060666

Analysis of Process Parameters in the Production of Orthopedic Implants Combining Metal Injection Moulding and Polymer over Moulding
Scholz, S.; Sampaio, D.; Müller, T.; Philip-Picher, M.; Wilfinger, T.; Wittner, W.; Prantl, M.
2017. WCMNM 2017: 2017 World Congress on Micro and Nano Manufacturing - A Joint Conference of ICOMM/4M/IFMM, Kaohsiung, Taiwan, March 27-30, 2017

Opportunities for producing dimensionally enhanced powder-injection-molded parts
Piotter, V.; Klein, A.; Mueller, T.; Plewa, K.
2017. Metal powder report, 73 (2), 68–71. doi:10.1016/j.mprp.2017.06.071

Nano inks for additive manufacturing - a safe-by-design-approach
Nau, K.; Müller, T.; Scholz, S. G.; Sampaio, D. J. B. S.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 212–214, International Academy, Research, and Industry Association (IARIA)

Nano inks for additive manufacturing - a safe-by-design-approach
Nau, K.; Müller, T.; Scholz, S. G.; Sampaio, D. J. B. S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017

Moulded Interconnect devices
Brunet, A.; Gengenbach, U.; Müller, T.; Scholz, S.; Dickerhof, M.
2017. Micro-Manufacturing Technologies and Their Applications : A Theoretical and Practical Guide. Ed.: I. Fassi, Springer International Publishing. doi:10.1007/978-3-319-39651-4_7

Mikrofertigungstechnologien und ihre Anwendungen – ein theoretischer und praktischer Leitfaden
Brunet, A.; Müller, T.; Scholz, S.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000062009

High throughput polymer micro replication quality assurance using 3D optical high-speed metrology
Scholz, S.; Calaon, M.; Tosello, G.; Hansen, H.; Prantl, M.; Dessors, S.; Müller, T.; Miller, N.
2016. 16th International Conference of the European Society for Precision Engineering and Nanotechnology (2016), Nottingham, Vereinigtes Königreich, 30. Mai–3. Juni 2016

Towards in process control of polymer injection moulded micro components
Calaon, M.; Tosello, G.; Hansen, H. N.; Prantl, M.; Dessors, S.; Mueller, T.; Scholz, S. G.; Miller, N.
2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, Nottingham, GB, May 30 - June 3, 2016. Ed.: P. Bointon, 455–456, European Society for Precision Engineering and Nanotechnology (euspen)

Steigerung der Präzision im Mikro-Pulverspritzgießen. Dissertation
Müller, T.
2016

Eignung des Kunststoff-Freiformens für metallische Bauteile
Spiller, Q.; Müller, T.; Plewa, K.; Hanemann, T.; Fleischer, J.
2016. VDI-Z integrierte Produktion, (11), 1–2

Validation of precision powder injection molding process simulations using a spiral test geometry
Marhöfer, M.; Müller, T.; Tosello, G.; Islam, A.; Hansen, H. N.; Piotter, V.
2016. Proceedings of the Regional Conference Graz 2015 : Polymer Processing Society PPS: Conference Papers ; 21-25 September 2015, Graz, Austria. Ed.: C. H. Holzer, Art. Nr.: 020015, American Institute of Physics (AIP). doi:10.1063/1.4965466

Manufacturing and investigation of precision powder injection moulded parts
Piotter, V.; Klein, A.; Müller, T.; Plewa, K.
2016. World PM2016 Congress & Exhibition, Hamburg, October 9-13, 2016. Proceedings on USB-Stick, EPMA

Manufacturing of integrative membrane carriers by novel powder injection molding
Piotter, V.; Klein, A.; Mueller, T.; Plewa, K.
2016. Microsystem technologies, 22 (10), 2417–2423. doi:10.1007/s00542-015-2563-y

Injection moulding and selective metallisation technologies for polymer microsystems
Dessors, S.; Tenchine, L.; Gout, S.; Azcarate, S.; Tosello, G.; Calaon, M.; Miller, N.; Brown, B.; Edouard, C.; Müller, T.; Wittner, W.; Prantl, M.; Shang, X.; Batal, A.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016

Injection moulding and selective metallisation technologies for polymer microsystems
Dessors, S.; Tenchine, L.; Gout, S.; Azcarate, S.; Tosello, G.; Calaon, M.; Miller, N.; Brown, B.; Edouard, C.; Müller, T.; Wittner, W.; Prantl, M.; Shang, X.; Batal, A.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, 19–22, Research Publishing (SCIRP)

Combining metal injection moulding and polymer over moulding for the production of orthopaedic implants
Müller, T.; Santos Machado, L.; Philipp-pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Scholz, S. G.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, Research Publishing (SCIRP). doi:10.3850/978-981-11-0749-8_742

Combining metal injection moulding and polymer over moulding for the production of orthopaedic implants
Müller, T.; Santos Machado, L.; Philipp-pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Scholz, S. G.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016

Process optimization for injection moulding of passive microwave compounds
Scholz, S. G.; Mueller, T.; Santos Machado, L.; Calaon, M.; Tosello, G.; Dessors, S.; Pranti, M.; Miller, N.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016

Process optimization for injection moulding of passive microwave compounds
Scholz, S. G.; Mueller, T.; Santos Machado, L.; Calaon, M.; Tosello, G.; Dessors, S.; Pranti, M.; Miller, N.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, Research Publishing (SCIRP). doi:10.3850/978-981-11-0749-8_743

Development and characterization of functional polymer-ceramic composite structures using fused deposition modeling
Khatri, B.; Lappe, K.; Habedank, M.; Mueller, T.; Megnin, C.; Hanemann, T.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, 251–254, Research Publishing (SCIRP)

Development and characterization of functional polymer-ceramic composite structures using fused deposition modeling
Khatri, B.; Lappe, K.; Habedank, M.; Mueller, T.; Megnin, C.; Hanemann, T.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016

Requirements for 3D printed applications using novel nanoparticle enhanced digital materials
Brunet, A.; Müller, T.; Scholz, S.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 31–34, International Academy, Research, and Industry Association (IARIA)

Requirements for 3D printed applications using novel nanoparticle enhanced digital materials
Brunet, A.; Müller, T.; Scholz, S.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016

Novel nanoparticle enhanced digital materials for 3D printing and their application shown for the robotic and electronic industry
Scholz, S.; Brunet, A.; Müller, T.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016

Novel nanoparticle enhanced digital materials for 3D printing and their application shown for the robotic and electronic industry
Scholz, S.; Brunet, A.; Müller, T.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 27–30, International Academy, Research, and Industry Association (IARIA)

A modular flexible scalable and reconfigurable system for manufacturing of Microsystems based on additive manufacturing and e-printing
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Adamietz, R.; Iseringhausen, T.; Kimmig, D.; Dickerhof, M.; Woegerer, C.
2016. Robotics and computer integrated manufacturing, 40, 14–23. doi:10.1016/j.rcim.2015.12.006

Powder injection moulding of multi-material devices
Piotter, V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2015. Powder metallurgy, 58 (5), 344–348. doi:10.1179/0032589915Z.000000000256

SMARTLAM - A modular, flexible, scalable, and reconfigurable system for manufacturing of microsystems
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Iseringhausen, T.; Dickerhof, M.; Schmidt, A.; Woegener, C.
2015. 4th International Conference on Intelligent Systems and Applications (INTELLI 2015), St.Julians, Malta, October 11-16, 2015

SMARTLAM - A modular, flexible, scalable, and reconfigurable system for manufacturing of microsystems
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Iseringhausen, T.; Dickerhof, M.; Schmidt, A.; Woegener, C.
2015. INTELLI 2015 : 4th International Conference on Intelligent Systems and Applications, St.Julians, Malta, October 11-16, 2015 . Ed.: I. Schwab, 140–141, International Academy, Research, and Industry Association (IARIA)

Accuracy examinations in powder injection compression moulding
Piotter, V.; Klein, A.; Mueller, T.; Plewa, K.
2015. International Powder Metallurgy - Congress and Exhibition (Euro PM); Reims; France; 4-7 October 2015, EPMA

Extrudieren von hochviskosen Pyrolysekoks-Pasten
Nicoleit, T.; Niebel, A.; Wernet, F.; Elhami, O.; Müller, T.; Antusch, S.; Emin, A.; Dahmen, N.; Sauer, J.
2014. DGMK-Fachbereichstagung: Konversion von Biomassen, Rotenburg a.d. Fulda, 12.- 14. Mai 2014

Extrudieren von hochviskosen Pyrolysekoks-Pasten
Nicoleit, T.; Niebel, A.; Wernet, F.; Elhami, O.-H.; Müller, T.; Antusch, S.; Emin, A.; Dahmen, N.; Sauer, J.
2014. Beiträge zur DGMK-Fachbereichstagung ’Konversion von Biomassen’, Rotenburg a.d. Fulda, 12.- 14. Mai 2014. Hrsg.: R. Abraham, 237–244, Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas und Kohle e.V. (DGMK)

Advances in PIM process simulation speed up the development of micro parts
Heneka, J.; Müller, T.; Thornagel, M.; Florez, L.
2014. Powder Injection Moulding International, 8, 67–71

Einfluss der Massenaufbereitung auf die Verarbeitungseigenschaften für das Mikro-Pulverspritzgießen
Piotter, V.; Hanemann, T.; Müller, T.; Plewa, K.
2014. Verfahren zur Aufbereitung keramischer Rohstoffe : Symposium des DGK Fachausschusses 3: Verfahrenstechnik, Erlangen, 26.-27.November 2014

Injection moulding for nano- and microfabrication
Piotter, V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2014. ANKA/KNMF Users’ Meeting 2014, Karlsruhe, Octpber 13-14, 2014

Considerations on the production of micro and precision PIM parts
Piotter, V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2014. Euro PM 2014, Salzburg, A, September 21-24, 2014

Replication processes for metal and ceramic micro parts
Piotter, V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.; Prokop, J.
2014. Microsystem technologies, 20, 2011–2016. doi:10.1007/s00542-013-2045-z

Powder injection moulding of multi-material devices
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2014. Euro PM 2014, Salzburg, A, September 21-24, 2014

Analysis of the influence of sinter temperature on the joint quality of sinter-joined microcheck valves made of 17-4 PH stainless steel
Klimscha, K.; Müller, T.; Fleischer, J.
2014. The international journal of advanced manufacturing technology, 72, 173–178. doi:10.1007/s00170-013-5580-y

Micro and precision powder injection molding - materials, variants, opportunities
Piotter, V.; Antusch, S.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2014. International Conference on Injection Molding of Metals, Ceramics and Carbides (MIM 2014), Long Beach, Calif., February 24-26, 2014

Simulation reduces risk in micro-PIM applications
Heneka, J.; Müller, T.; Thornagel, M.
2014. Ceramic Forum International - Berichte der Deutschen Keramischen Gesellschaft, 91 (3-4), E45

High-grade micro components produced by variants of powder injection moulding
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2013. Annual European Powder Metallurgy Congress (Euro PM 2013), Göteborg, S, September 15-18, 2013

Micro-moulded CIM-components: simulation based mould- and process development
Heneka, J.; Müller, T.; Thornagel, M.
2013. Annual European Powder Metallurgy Congress (Euro PM 2013), Göteborg, S, September 15-18, 2013

High-grade micro components produced by variants of powder injection moulding
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2013. Annual European Powder Metallurgy Congress (Euro PM 2013), Göteborg, S, September 15-18, 2013 Proceedings.Vol.1, 293–298, European Powder Metallurgy Association (EPMA)

Micro-moulded CIM-components: simulation based mould- and process development
Heneka, J.; Müller, T.; Thornagel, M.
2013. Annual European Powder Metallurgy Congress (Euro PM 2013), Göteborg, S, September 15-18, 2013. Vol.1, 369–374, European Powder Metallurgy Association (EPMA)

Investigation of dimensional accuracy in powder injection molding
Müller, T.; Plewa, K.; Piotter, V.
2013. 10th International Conference on Multi-Material Micro Manufacture (4M2013), San Sebastian, E, October 8-10, 2013

Polymer and ceramic components for various scientific applications
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2013. ANKA/KNMF Nutzertreffen, Bruchsal, 26.-27.September 2013

Mikropulverspritzgießen (MicroPIM) - vom Feedstock bis zum Sinterteil
Piotter, V.; Bauer, W.; Hanemann, T.; Müller, M.; Müller, T.; Plewa, K.
2013. 6.Kolloquium Mikroproduktion, Braunschweig, 8.Oktober 2013

Examinations on the production of micro and precision PIM-parts
Piotter, V. V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2013. Advances in powder metallurgy & particulate materials - 2013 : proceedings of the 2013 International Conference on Powder Metallurgy & Particulate Materials sponsored by the Metal Powder Industries Federation, June 24 - 27, Chicago, Il. Ed.: D. Christopherson, 450–456, Princeton

Examinations on the production of micro and precision PIM-parts
Piotter, V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2013. PowderMet Conference 2013, Chicago, Ill., June 24-27, 2013

MicroPIM im Fokus
Plewa, K.; Honza, E.; Müller, T.; Piotter, V.
2013. 50 Jahre Arburg PIM-Kompetenz, Lossburg, 5.-6.Juni 2013

Replication processes for metal and ceramic micro parts
Piotter, V.; Honza, E.; Klein, A.; Mueller, T.; Plewa, K.
2013. 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST 2013), Berlin, April 21-24, 2013 Book of Abstracts

Micro injection molding technology
Piotter, V.; Hanemann, T.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2013. DESY-Seminar, Hamburg, 8.April 2013

Micro precision parts produced by powder injection molding
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2013. Proceedings of the 2012 Powder Metallurgy World Congress and Exhibition (PM 2012), Yokohama, J, October 14-18, 2012, Paper 16B-T5–12, Japan Society of Powder and Powder Metallurgy

Investigations into the influence of joining surface parameters on the strength of sinter joined connections
Fleischer, J.; Klimscha, K.; Müller, T.
2012. Annual European Powder Metallurgy Congress (Euro PM 2012), Basel, CH, September 16-19, 2012. Vol.: 3, 111–116, European Powder Metallurgy Association (EPMA)

Recent developments in metal and ceramic micro injection moulding
Piotter, V.; Honza, E.; Müller, T.; Plewa, K.
2012. Annual European Powder Metallurgy Congress (Euro PM 2012), Basel, CH, September 16-19, 2012. Vol.: 3, 1–6, European Powder Metallurgy Association (EPMA)

Micro precision parts produced by powder injection molding
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2012. Powder Metallurgy World Congress and Exhibition (PM 2012), Yokohama, J, October 14-18, 2012

Road to reliability. Quality improvements in powder injection molding
Müller, T.; Hanemann, T.; Piotter, V.; Plewa, K.
2012. IMTEK Research Day, Freiburg, 16.Oktober 2012

Recent developments in metal and ceramic micro injection moulding
Piotter, V.; Honza, E.; Müller, T.; Plewa, K.
2012. Annual European Powder Metallurgy Congress (Euro PM 2012), Basel, CH, September 16-19, 2012

Investigations into the influence of joining surface parameters on the strength of sinter joined connections
Fleischer, J.; Klimscha, K.; Müller, T.
2012. Annual European Powder Metallurgy Congress (Euro PM 2012), Basel, CH, September 16-19, 2012

Bedeutung organischer Additive in der Formmassenentwicklung für das Pulverspritzgießen
Müller, T.; Weber, O.; Hanemann, T.
2012. Sitzung des DKG Fachausschusses Verfahrenstechnik, Bomlitz, 13.Juni 2012

Micro injection moulding and multi component micro injection moulding
Piotter, V.; Honza, E.; Klein, A.; Müller, T.; Plewa, K.
2012. COTECH Workshop - Training for Professionals, Stockholm, S, June 8, 2012

Multi-component parts made by micro ceramic injection moulding
Piotter, V.; Honza, E.; Mueller, T.; Plewa, K.
2012. 10th Internat.Symp.on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE), Dresden, May 20-23, 2012

Abformung - Replikation keramischer und metallischer Mikrobauteile
Müller, T.; Müller, M.; Buqezi-Ahmeti, D.; Klimscha, K.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium des Sonderforschungsbereichs 499 ’Mikro-Urformen’, Karlsruhe, 11.-12.Oktober 2011

Manufacturing of high-grade micro components by powder injection molding
Piotter, V.; Plewa, K.; Müller, T.; Ruh, A.; Vorster, E.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2011. Internat.Conf.on Precison Engineering ICoPE2010 & 13th ICPE, Singapore, SGP, July 28-30, 2010

Manufacturing of high-grade micro components by powder injection molding
Piotter, V.; Plewa, K.; Müller, T.; Ruh, A.; Vorster, E.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2011. Selected, Peer Reviewed Papers from the ICoPE2010 & 13th ICPE Internat.Conf.on Precision Engineering, Singapore, SGP, July 28-30, 2010 Stafa-Zuerich : Trans Tech Publ., 2010 (Key Engineering Materials ; 447-448), 351–355

Mikroreplikation: Formmassen- und Prozessentwicklung für das Pulverspritzgießen
Weber, O.; Müller, T.; Hanemann, T.; Piotter, V.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 105–112, KIT Scientific Publishing

Spritzgießen von Mikroteilen aus Kunststoffen, Metallen und Keramiken
Piotter, V.; Antusch, S.; Hanemann, T.; Haußelt, J.; Honza, E.; Müller, T.; Plewa, K.; Prokop, J.; Ruh, A.; Weber, O.
2011. Vortr.: EMPA, Dübendorf, CH, 30.Septembe 2011

Production of multi-material micro parts by powder injection moulding
Piotter, V.; Mueller, T.; Prokop, J.; Plewa, K.; Ruh, A.; Vorster, E.
2011. Euro : Powder Metallurgy Congress and Exhibition, Barcelona, E, October 9-12, 2011

Mikroreplikation: Formmassen- und Prozessentwicklung für das Pulverspritzgießen
Weber, O.; Müller, T.; Piotter, V.; Hanemann, T.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium des Sonderforschungsbereichs 499 ’Mikro-Urformen’, Karlsruhe, 11.-12.Oktober 2011

Influence of stearic acid concentration on the processing of ZrO₂-containing feedstocks suitable for micropowder injection molding
Hanemann, T.; Heldele, R.; Mueller, T.; Haußelt, J.
2011. International Journal of Applied Ceramic Technology, 8, 865–872. doi:10.1111/j.1744-7402.2010.02519.x

Facing the challenges of micro powder injeciton molding. Improving the dimensional accuracy by process customization
Müller, T.; Piotter, V.; Plewa, K.; Hanemann, T.
2011. IMTEK Poster Session, Freiburg, 14.Juli 2011

Micro systems need a boost in manufacturing methodologies
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Vorster, E.; Hausselt, J.
2011. Metal powder report, (2), 33–35. doi:10.1016/S0026-0657(11)70061-3

Dimensionierungsoptimierung von pulverspritzgegossenen Mikrobauteilen
Müller, T.
2011. Doktorandenworkshop, KIT Campus Nord, Karlsruhe, 19.-20.Mai 2011

Special variants of metal and ceramic micro injection molding
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Vorster, E.; Hausselt, J.
2011. Internat.Conf.on Powder Metallurgy and Particulate Materials (PowderMet 2011), San Francisco, Calif., May 18-21, 2011

New methacrylate-based feedstock systems for micro powder injection moulding
Hanemann, T.; Honnef, K.; Müller, T.; Weber, O.
2011. Microsystem Technologies, 17, 451–457. doi:10.1007/s00542-011-1243-9

Powder injection moulding of metallic and ceramic micro parts
Piotter, V.; Bauer, W.; Knitter, R.; Mueller, M.; Mueller, T.; Plewa, K.
2011. Microsystem Technologies, 17, 251–263. doi:10.1007/s00542-011-1274-2

Patterns for design in microtechnology
Albers, A.; Deigendesch, T.; Turki, T.; Müller, T.
2010. Microsystem Technologies, 16 (8-9), 1537–1545. doi:10.1007/s00542-010-1042-8

One- and two-component micro powder injection moulding derived from thermoplastic microreplication
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Hausselt, J.
2010. Plastics, rubber and composites, 39, 287–292. doi:10.1179/174328910X12691245470310

Powder injection moulding for the production of micro components
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Vorster, E.; Hausselt, J.
2010. PM 2010 : World Powder Metallurgy Congress and Exhibition, Firenze, I, October 10-14, 2010 Proc.Vol.4 Shrewsbury : EPMA, 2010

Micro powder injection moulding. New developments and results
Piotter, V.; Müller, T.; Plewa, K.; Prokop, J.; Ruh, A.; Vorster, E.
2010. KNMF (Karlsruhe Nano Micro Facility) User Meeting, Karlsruhe, October 7-8, 2010

Powder injection moulding for the production of micro components
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Vorster, E.; Hausselt, J.
2010. PM 2010 : World Powder Metallurgy Congress and Exhibition, Firenze, I, October 10-14, 2010 Proc.Vol.4 Shrewsbury : EPMA, 2010, 437–43

Herstellung von komplexen Mikrobauteilen durch Ein- und Zweikomponenten-Pulverspritzgießen
Müller, T.; Ruh, A.; Piotter, V.; Ritzhaupt-Kleissl, H. J.
2010. Technologien und Werkstoffe der Mikrosystem- und Nanotechnik : 2.GMM Workshop, Darmstadt, 10.-11.Mai 2010

Metal and ceramic micro injection moulding
Prokop, J.; Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Hausselt, J.
2010. European Microwave Week, Paris, F, September 26 - October 1, 2010

Mikro-Pulverspritzgießen
Müller, T.; Prokop, J.; Ruh, A.; Piotter, V.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2010. 2.Industriekolloquium der Forschergruppe 702 ’Mikrobauteile’, Karlsruhe, 24.Juni 2010 Poster auf CD-ROM zum Tagungsbd

Patterns for design in microtechnology
Albers, A.; Deigendesch, T.; Turki, T.; Müller, T.
2010. 8th Internat.Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST 2009), Saskatoon, CDN, June 25-28, 2009

Ceramic micro parts produced by micro injection molding: latest developments
Müller, T.; Piotter, V.; Plewa, K.; Guttmann, M.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2010. Microsystem Technologies, 16, 1419–23. doi:10.1007/s00542-009-0992-1

Micro powder injection molding: development of alternative feedstocks for the realization of ceramic and metal parts
Hanemann, T.; Honnef, K.; Müller, T.; Weber, O.
2010. Pfefferkorn, F.E. [Hrsg.] ICOMM/4M 2010 : The 5th Internat.Conf.on MicroManufacturing, Madison, Wis., April 5-8, 2010 Proc.on CD-ROM Paper No.20 Madison, Wis. : University of Wisconsin, 2010

Micro powder injection molding: development of alternative feedstocks for the realization of ceramic and metal parts
Hanemann, T.; Honnef, K.; Müller, T.; Weber, O.
2010. Pfefferkorn, F.E. [Hrsg.] ICOMM/4M 2010 : The 5th Internat.Conf.on MicroManufacturing, Madison, Wis., April 5-8, 2010 Proc.on CD-ROM Paper No.20 Madison, Wis. : University of Wisconsin, 2010, 105–11

Characterisation of wear of mold inserts used in powder injection molding of ZrO₂ feedstock
Heneka, J.; Prokop, J.; Müller, T.; Piotter, V.; Börsting, P.; Haußelt, J.
2010. IMTEK Postersession, Freiburg, 24.Juni 2010

Feedstock development for micro metal injection molding
Müller, T.; Weber, O.; Hanemann, T.
2010. IMTEK Postersession, Freiburg, 24.Juni 2010

Development of polymer matrix composites for the realisation of ceramic and metal microcomponents using micro powder injection moulding
Weber, O.; Müller, T.; Hanemann, T.
2010. 14th European Conf.on Composite Materials, Budapest, H, June 7-10, 2010

Spritzgusssimulation kleiner keramischer Bauteile und die Übertragung in die Praxis
Plewa, K.; Heldele, R.; Müller, T.; Ruh, A.; Walter, H.
2010. Technologien und Werkstoffe der Mikrosystem- und Nanotechnik : 2.GMM Workshop, Darmstadt, 10.-11.Mai 2010

Spritzgusssimulation kleiner keramischer Bauteile und die Übertragung in die Praxis
Plewa, K.; Heldele, R.; Müller, T.; Ruh, A.; Walter, H.
2010. Technologien und Werkstoffe der Mikrosystem- und Nanotechnik : 2.GMM Workshop, Darmstadt, 10.-11.Mai 2010

Metal and ceramic micro injection moulding
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Vorster, E.; Haußelt, J.
2010. Micro-Nano Moulding Seminar - Technologies and Applications, Copenhagen, DK, April 27, 2010

Mikro-Pulverspritzgießen (MicroPIM)
Piotter, V.; Müller, T.; Plewa, K.; Ruh, A.; Ritzhaupt-Kleissl, H. J.; Haußelt, J.
2010. Tagung Kunststofftechnologie, Fribourg, CH, 29.April 2010

Metal and ceramic parts fabricated by microminiature powder injection molding
Piotter, V.; Hanemann, T.; Heldele, R.; Müller, M.; Müller, T.; Plewa, K.; Ruh, A.
2010. International Journal of Powder Metallurgy, 46 (2), 21–28

Manufacturing of complex-shaped ceramic components by micropowder injection molding
Piotter, V.; Müller, T.; Plewa, K.; Prokop, J.; Ritzhaupt-Kleissl, H. J.; Haußelt, J.
2010. International Journal of Advanced Manufacturing Technology, 46, 131–34. doi:10.1007/s00170-009-2095-7

Spritzgießsimulation kleiner keramischer Bauteile und die Übertragung in die Praxis
Plewa, K.; Heldele, R.; Müller, T.; Ruh, A.; Walter, H.
2009. Plastische und thermoplastische Formgebung : DKG-Symp., Erlangen, 1.-2.Dezember 2009

Metal, ceramic and polymer micro injection moulding
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Vorster, E.; Hausselt, J.
2009. Metal, Ceramic and Polymer Injection Moulding : 37eme Seminaire INFOMAT, Neuchatel, CH, 13 Novembre 2009

Micro (powder-)injection moulding
Piotter, V.; Müller, T.; Plewa, K.; Prokop, J.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Haußelt, J.
2009. 1st ANKA/KNMF Joint Users Meeting, Karlsruhe, October 8-9, 2009 Book of Abstracts

One- and two-component powder injection moulding for micro fabrication
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Hausselt, J.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23-25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online

Complex shaped micro components produced by powder injection molding
Müller, T.; Piotter, V.; Plewa, K.; Prokop, J.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23-25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online

One- and two-component powder injection moulding for micro fabrication
Piotter, V.; Müller, T.; Plewa, K.; Ritzhaupt-Kleissl, H. J.; Ruh, A.; Hausselt, J.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23-25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online, 429–32

Complex shaped micro components produced by powder injection molding
Müller, T.; Piotter, V.; Plewa, K.; Prokop, J.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23-25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online, 103–06

Metal and ceramic micro parts produced by powder injection molding (MicroPIM)
Piotter, V.; Müller, T.; Plewa, K.; Ruh, A.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2009. ANTEC 2009, Chicago, Ill., June 22-24, 2009

Alternative feedstock development for micro powder injection molding
Müller, T.; Weber, O.; Hanemann, T.; Honnef, K.; Haußelt, J.
2009. IMTEK Poster-Session, Universität Freiburg, 18.Juni 2009

Ceramic micro parts produced by micro injection molding - latest developments
Müller, T.; Piotter, V.; Ritzhaupt-Kleissl, H. J.; Hausselt, J.
2009. 8th Internat.Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST 2009), Saskatoon, CDN, June 25-28, 2009